Toolfinder - Find the right tool in 3 simple steps
Find the right tool in 3 simple steps:
We offer a wide range of different tools for various applications.
Our tool finder helps you to find the right tool for your application.
Tools
The following tools match your specifications:HGx-9
Processing diameter:
Suits with these workpiece geometries:
HGx-9 for external machining of rotation-symmetric surfaces
HGx-9 tools machine all rotationally symmetrical components and irregular free-form surfaces. They can roller burnish and deep roll all metallic and hardened materials up to 65 HRC on conventional and CNC lathes. An external pressure supply is required to operate the tool in the universal standard version (hydraulic unit and high-pressure supply line). Pressure is supplied from the side or rear through the clamping bar.
- Suitable for roller burnishing and deep rolling of all metallic materials as well as hardened materials up to 65 HRC.
- Operation with external pressure supply.
- Rolling force dependent on pressure, therefore easy to monitor process with consistent product quality.
EG5
Processing diameter:
Suits with these workpiece geometries:
EG5 - Modular system for universal use
EG5 tools enable economical roller burnishing of all straight, rotation-symmetric surfaces. Depending on the design, external cylindrical and conical surfaces, external and internal plane surfaces as well as cylindrical and conical bores can be machined. They can be used on CNC lathes or conventional lathes and work in a single set-up, eliminating set-up and downtimes.
- Surface quality of Rz < 1 μm (Ra ≤ 0.1 μm) achievable.
- Machining of all metallic materials up to a tensile strength of 1400 N/mm2 and a maximum hardness of HRC ≤ 45.
- Consistent and controlled work result by measuring the rolling force.
EG5-08F
Processing diameter:
Suits with these workpiece geometries:
EG5-08F Tools for machining groove flanks
EG5-08F tools machine groove flanks on the face or circumference and bores. They can be used on CNC lathes or conventional lathes and work in a single setting, eliminating set-up and downtimes.
- Surface quality of Rz < 1 μm (Ra ≤ 0.1 μm) achievable.
- Machining of all metallic materials up to a tensile strength of 1400 N/mm2 and a maximum hardness of HRC ≤ 45.
- Consistent and controlled work result by measuring the rolling force.
- Max. rolling depth 20 mm for bores from Ø 8 mm.