Toolfinder - Find the right tool in 3 simple steps
Find the right tool in 3 simple steps:
We offer a wide range of different tools for various applications.
Our tool finder helps you to find the right tool for your application.
Tools
The following tools match your specifications:EG45
Processing diameter:
Suits with these workpiece geometries:
EG45 for roller burnishing of larger components
EG45 tools machine transition radii, chamfers and contours. They can be used on CNC lathes or conventional lathes with hydraulic contouring equipment in a single set-up, eliminating set-up and downtimes. The rolling force is infinitely adjustable. They eliminate microscopic grooves and introduce compressive residual stresses and work hardening into the workpiece.
- Processing of transition radii and contours.
- Achievable surface quality of Rz < 1 µm (Ra < 0.1 µm).
- Machining of materials with a hardness of up to 45 HRC.
EG5-40M
Processing diameter:
Suits with these workpiece geometries:
EG5-40M tools for external surfaces with contours
EG5-40M tools can machine external surfaces with subsequent radius to the plane surface in a single set-up on CNC or conventional lathes, eliminating set-up and auxiliary processing time. They are characterised in particular by short main times and a consistent and controlled work result by measuring the rolling force. No dust or grinding residue is produced and only minimal lubrication (oil or emulsion) is required. The rolling force is infinitely adjustable by means of support adjustment.
- In this variant of the EG5 series, the roller is equipped with an integrated 4-point bearing.
- Suitable for low and medium strength materials.
- The roller head with extremely narrow roller is attached to the spring-loaded part of the tool body.
EG5
Processing diameter:
Suits with these workpiece geometries:
EG5 - Modular system for universal use
EG5 tools enable economical roller burnishing of all straight, rotation-symmetric surfaces. Depending on the design, external cylindrical and conical surfaces, external and internal plane surfaces as well as cylindrical and conical bores can be machined. They can be used on CNC lathes or conventional lathes and work in a single set-up, eliminating set-up and downtimes.
- Surface quality of Rz < 1 μm (Ra ≤ 0.1 μm) achievable.
- Machining of all metallic materials up to a tensile strength of 1400 N/mm2 and a maximum hardness of HRC ≤ 45.
- Consistent and controlled work result by measuring the rolling force.
EG5-1-25
Processing diameter:
Suits with these workpiece geometries:
EG5-1-25 tools for basic grooving
EG5-1-25 tools can be used universally and as right or left-hand tools thanks to a modular system. They can be used on CNC or conventional lathes in a single set-up, eliminating set-up and downtimes. The face of the roller remains free, allowing machining close to shoulders and other edges.
- Surface quality of Rz < 1 µm (Ra = 0.2 µm) achievable.
- Machining of all metallic materials up to a tensile strength of 1400 N/mm2 and a maximum hardness of HRC ≤ 45.
- Easy replacement of wear parts.